Specification : Drone jammer
Channel1 RC2.4G 2400-2500MHz
Channel2 RC5.8G 5725-5850MHz
Channel3 GPSL1 1560-1625MHz
Channel4 GPSL2+L5 1150-1320MHz
Channel5 RC 900 850-920MHz
Channel6 RC5.2G 5150-5350MHz
Channel7 RC 433 310-435MHz
Channel8 GPSL1-2 1400-1520MHz
Therefore, Drone monitoring and protection has become an urgent issue to be solved.
The Wolves Team UAV Defense System solution will fixed jammer developed automatically connect with each other through the back-end management platform and send jamming signals to shoot down the Drone after detecting the invasion of the Drone.
At present, it is widely used in the protection of low and medium altitude areas.
The feature of controlling the jamming device remotely (on - off - programming).
The battery operation period not be less than two continuous hours, with additional batteries provided to double the device operation period to no less than (4) Hours with hot swapping feature for batteries.
The device must be health-safe for the device operators.
The device can be operated at a temperature of no less than (60) Celsius, a humidity of no less than (90%), and the possibility of storing it at a temperature no less than about (70) degrees Celsius.
Providing inspection tools to ensure the device is working.
The device must be resistant to shocks, dust, and water splashes.
Advantages and Features
Aluminum-alloy casing with high protection has high resistance to dust, water and corroding.
Heat sink designing combing with the fans to make system in a cooling status.
Special technology to prevent interference between each frequency band.
Only interfere downlink frequency of mobile system, without disturb normally working of Base Stations.
Frequency bands and output power selectable.
Each frequency band controlled by independent RF ON/OFF switches.
Power of each frequency band can be adjustable independently.
Circuit protection to ensure system will not burn out in case of antenna short circuiting or disconnection.
Antenna type options, directional or Omni-directional antennas option.
Easy operation and installation.
Keep for upgrade module installation.
Working 24 hours/365days continuously.
Wired Remote Control Panel (option)
Portable Jammer has wired remote control function. And this remote control panel could be performed in the driver’s console unit. So it will be very convenient for the driver to remote control the jammer to turn on/off each module separately while driving.
With this remote control panel, the driver can turn off a specific frequency band to make sure the internal communication in emergency.
Remote control switches of each machine.
Remote viewing each machine working state.
The power output of each machine remote adjustment.
Remote viewing offline log of each machine.
